Snapdragon 765G vs Dimensity 1000L

The positioning of the Snapdragon 765 Reno3 Pro 5G versus the Dimensity 1000L Reno3 5G is an extremely interesting one. By all means, the regular Reno3 is supposed to be the lower-end device and in fact does cost less than the Pro variant of the phone. Logically, we would expect OPPO here to choose the lower-end SoC for the Reno3 whilst the Reno3 Pro gets the better performing chipset. Although that’s what everybody would assume at first glance, things aren’t quite as straightforward.

The although the two devices and SoCs are seemingly positioned close to each other, they’re very different in terms of CPU capabilities. There are two factors at play here: first of all, the MediaTek chipset outright has a core-count advantage over the Qualcomm design by simply having four big cores instead of only two. That’s already a major difference and usually the kind of differentiation you’d expect from SoC at different class categories.

Secondly, MediaTek’s design uses newer Cortex-A77 cores whilst the Snapdragon uses last year’s Cortex-A76 IP. The Cortex-A77 is generally 25% better clock-for-clock compared to its predecessor, which seemingly compounds the processing power ability difference between the two SoCs and Reno3 phones. Qualcomm does have an advantage in terms of clocks speeds which does slightly make up some of this difference: at 2.4GHz on one of the Cortex-A76 cores it’s 200MHz ahead of the MediaTek chipset, which should reduce the expected performance gap a little bit.

Another big difference between the two SoCs is the fact that MediaTek uses TSMC’s 7nm node, while the Snapdragon 765 is manufactured on Samsung’s 7LPP node, with the only other public silicon out there manufactured on this process technology being Samsung’s own Exynos chipsets.

Comparing single-threaded performance between the two SoCs, we see the expected performance gap between the two designs materialise in the measured results. In SPEC2006, the Dimensity 1000L outperforms the S765 by respectively 13% and 22% in the integer and floating-point suites.

Furthermore, the Dimensity-powered Reno3 5G is able to do this whilst consuming less power and energy than the Qualcomm chipset. Generally, we expect this difference to be process-node related as we highly suspect Samsung’s 7nm node being less power efficient than TSMC’s process technology.

GeekBench 5

Whilst we don’t usually run SPEC in rate mode (multi-process test), GeekBench5 very much showcases the multi-threaded performance advantage that the MediaTek-powered Reno3 5G has over the Reno3 Pro 5G: With a score of 2702, it’s 50% faster than the 1802 score of the Snapdragon 765.

The one area where I did note that the Snapdragon chipset outperforms the Dimensity counterpart is memory latency. On the part of the CPUs, the Qualcomm chipset seemingly has a lower latency memory subsystem that allows it roughly a 13% latency advantage in full random DRAM memory accesses – or around 22ns at a test depth of 128MB.

The memory characteristics between the two SoCs are quite different, as the MediaTek chipset does showcase stronger CPU-side memory bandwidth, particularly in memory reads that reach up to 19GB/s versus 13.3GB/s for the Qualcomm chipset, with a similar advantage in memory copies, although the Snapdragon seems to have faster accesses and more bandwidth for memory writes.

All in all, until now it seems that the MediaTek powered chipset has a clear advantage in terms of performance and power efficiency, which actually makes sense as the Dimensity 1000L on paper just is a higher specced piece of silicon.

3x Reno3's - All Different System Performance
POST A COMMENT

44 Comments

View All Comments

  • DanNeely - Monday, August 10, 2020 - link

    On the last page this paragraph is present twice:

    "Although the MediaTek chip has been out for several months now, we still have only seen a handful of devices using it, while in recent months we’ve seen a ton of Snapdragon 765 devices being announced and released."
    Reply
  • leexgx - Monday, August 10, 2020 - link

    quite surprising really as that phone was released about like 9 months ago (december 2019) and no one else has been using the Dimensity 1000L

    they should have been trying to push it out far more, but for them to say that well we are waiting for Q3 2020 before we go worldwide is surprising

    it already has full EU/UK 4G and 5G support, 40 2.3ghz and n70 3.5Ghz

    unsure if it will follow some of the newer 5G phones that can use like the "Oppo Find X2 Neo 5G,the snap 765G" as tah phone can also do {n1/3/5/7/28, witch is basically converting the 4G bands into 5g} at later date
    Reply
  • leexgx - Monday, August 10, 2020 - link

    (n78 not n70) Reply
  • beginner99 - Tuesday, August 11, 2020 - link

    Yeah having read this article I will certainly not buy one of these snapdragon765 phones and wait for such with 1000L. Reply
  • Mikad - Monday, August 10, 2020 - link

    The link in the sentence "grave limbo and run the risk of no longer seeing successors in the future" seems to be pointing into a local hard drive. Reply
  • Andrei Frumusanu - Monday, August 10, 2020 - link

    No idea how that happened- fixed. Reply
  • liteon163 - Monday, August 10, 2020 - link

    It would be nice if I could get an affordable vivo iQOO Z1 that worked on AT&T here in the US. I'd definitely purchase one, simply out of curiosity if nothing else. Reply
  • name99 - Monday, August 10, 2020 - link

    "These are quite terrible results for the Imagination GPU, and in hindsight, makes their claim of a 2.5x performance increase with the new A-Series GPU look a lot less impressive"

    Not to mention the good old "Apple stole the PowerVR design and all they have done since then is just tweak it slightly"... You still see a fair bit of that around the interwebs.
    Reply
  • Andrei Frumusanu - Monday, August 10, 2020 - link

    They didn't steal it, they just have an architectural license. The first GPUs for years were exactly that, tweaked designs that eventually morphed apart. Reply
  • Gnyueh - Tuesday, August 11, 2020 - link

    Xiaomi has announced Redmi K30 ultra with Dimensity 1000+ just now and it will be definitely an interesting product to test. There are a lot of products with MTK Dimensity SoCs but most of them are only available in China. Reply

Log in

Don't have an account? Sign up now