Assembling the Fractal Design Define R4

Much as with the Define R3, Fractal Design takes a few cues from Corsair in the ease of assembly arena. Despite having been under the weather with tension headaches and a stomach bug this week, the Define R4 was still pretty easy to put together.

Fractal Design doesn't include the convenience of pre-mounted motherboard standoffs, but it has all of the necessary mounting points for Mini-ITX, ATX, and large Micro-ATX boards like the one we use in our testbed. The I/O shield snapped in easily enough, and the motherboard went in without any real trouble. Vertical clearance is a little crunched (hence my reservations about using a 240mm radiator in the R4), but this is also a relatively small case compared to some of the monsters I've tested recently. The R4 really is a mid-tower or as most users would say, "reasonably sized."

Installing drives in the R4 is relatively easy, too. Fractal Design doesn't go the toolless route anywhere, but that may be to minimize vibration. There are silicone grommets on the drive trays for mechanical drives, and 2.5" drives just screw in directly to the bottom of the trays. These trays are designed primarily for bottom-mounting drives but there are a pair of holes in the sides for the oddball device that won't mount that way (like our Corsair Link unit). The drive shields for the 5.25" bays also lock in and pop out easily; they use a small lever you can lift with your thumb as a locking mechanism.

Expansion cards and the power supply are basically the same story. The expansion slots use thumbscrews as is de rigeur, while the power supply mount has padding behind and below it. Nothing entirely notable here, although it's worth mentioning again that the eighth expansion slot is positioned laterally above the seven and intended for adding ports or whatever other accessories might fit there. Doing this saves on the height of the case, but in the process it does crunch the space between the power supply and bottom of the motherboard some.

Where things start to go a little topsy turvy is with cabling. The rubber-grommet lined holes in the motherboard tray seem a little on the small side, which can be a minor inconvenience. I was disappointed to see Fractal Design still hasn't really fixed one of my big problems with the R3, though: the AUX 12V routing hole above the motherboard. They increased the space between the back of the motherboard tray and the the right side panel, but that doesn't change the fact that the AUX 12V line routing hole is essentially parallel to the panel rails. In the R3 I just plain couldn't use the hole, while in the R4 I could shimmy the cable through with a little effort. This still feels like a big oversight that needs to be corrected somehow, though. Fractal Design may want to consider switching over to a hinged side panel mounting design for the next revision to clear this gap.

By and large, though, assembly was pretty easy and I can't complain too much outside of the cabling snafu. What's worth pointing out is that the R4 does not feature an IDE indicator LED despite having space for one. The LEDs surrounding the power button and breaking the center of the front door are power indicators only. This is an unusual omission that doesn't affect the usability of the case too much (many notebooks these days don't include IDE indicators either), but it's worth mentioning.

In and Around the Fractal Design Define R4 Testing Methodology
Comments Locked


View All Comments

  • buildingblock - Friday, July 20, 2012 - link

    The move to 140mm fans for intake and exhaust is particularly welcomed, time to move on from the 120s.
  • HisDivineOrder - Friday, July 20, 2012 - link

    I'll agree with you once all the PWM fan makers start making fans in 140mm varieties. Right now, for great fans you choose between PWM and 140mm. That's not a choice that you should have to make.

    You'd think Corsair would be on the forefront of fixing this, seeing as they just released a premium fan line AND have cases that could use said fans. But no, they in fact released NO PWM fans at all.

    Until that day, 120mm needs to stay the standard.
  • prophet001 - Friday, August 10, 2012 - link

    Here is a link to some 140mm PWM fans. I just used the Akasa Vipers in my build and they're great fans. They can move as much air as your need or they can throttle to very quiet levels. I highly recommend them.
  • btb - Friday, July 20, 2012 - link

    I have both and R2 and R3 and really like them. The only thing I wish they would improve on is getting rid of the ugly top of the case, it detracts significantly from an otherwise very nice looking case. How big a percentage of the buyers of these cases do actually use the top exhausts? I'm guessing below 5%.
  • Dustin Sklavos - Friday, July 20, 2012 - link

    Well, the idea is to make space for a 240mm radiator or a closed-loop like the Corsair H100, but the problem is that clearance for radiators there just isn't good.
  • piroroadkill - Friday, July 20, 2012 - link

    Yeah, I think they need to use a Lian-Li style blanking plate, where it fits almost completely flush, leaving a smooth finish, but the user then has to supply a wire grill later.
  • beginner99 - Friday, July 20, 2012 - link

    I use it! make sense to have airflow from bottom/front to top as hot air flows up naturally anyway.
  • piroroadkill - Friday, July 20, 2012 - link

    This article has disappeared from the homepage! I can't read it anymore :(
  • piroroadkill - Friday, July 20, 2012 - link

    Ah, NDA, NDA, thought so. It's all good!
  • themossie - Friday, July 20, 2012 - link

    Neither the "next page" or menu to choose article pages is working - they both return me to the page.

    Other articles work fine.

    Is this just me, or is something wrong?

Log in

Don't have an account? Sign up now