AT20 Giveaway Day 3: Intel Core CPUs, SSDs, & Optane Memory Tooby Ryan Smith on April 28, 2017 9:00 AM EST
Good morning everyone! We’re now on day 3 of our 20 day celebration of AnandTech’s 20th anniversary.
After yesterday’s HTC U Ultra giveaway, today we’re back to PC parts, courtesy of Intel. For today’s giveaway the 800lb gorilla has contributed a true silicon sampler, sending us CPUs, SSDs, and even some Optane Memory cache drives to give away to you.
- 2x Intel Core i7-7700K
- 2x Intel SSD 600p 512GB
- 2x Intel Optane Memory 32GB
Intel Core i7-7700K
First up, Intel’s Core i7-7700K needs no introduction. Intel’s flagship consumer CPU is still the chip to beat for all but the most heavily threaded workloads, thanks to the high IPC of Intel’s architecture combined with the equally high clockspeeds afforded by Kaby Lake. The i7-7700K will turbo boost to 4.5GHz, and as this is an unlocked processor, you
can should must always overclock it even further.
|Core i7-7700K Specifications|
|i7-7700K||4/8||4.2/4.5||HD 630||8 MB||91 W|
As a reminder, retail box i7-7700Ks do not include a cooler, so along with a compatible motherboard you'll need a 3rd party cooler as well to complete the ensemble.
Intel SSD 600p 512GB
Second on our list of prizes is a pair of Intel 512GB 600p SSDs. The 600p is from Intel’s mainstream SSD family, combining an Intel-customized Silicon Motion SM2260 controller with Intel/Micron’s own 3D TLC NAND. These are single-sided M.2 2280 drives, so they’ll fit in virtually all M.2-equipped motherboards and laptops. And as one of what’s still a relatively small number of NVMe-capable PCIe 3.0 x4 drives on the market, the 512GB 600p can easily sustain reads over several-hundred megabytes-per-second.
|Intel SSD 600p 512GB Specifications|
|Form Factor||single-sided M.2 2280|
|Controller||Intel-customized Silicon Motion SM2260|
|Interface||PCIe 3.0 x4|
|NAND||Intel 384Gb 32-layer 3D TLC|
|SLC Cache Size||17.5 GB|
|Sequential Read||1775 MB/s|
|Sequential Write (SLC Cache)||560 MB/s|
|4KB Random Read (QD32)||128.5k IOPS|
|4KB Random Write (QD32)||128k IOPS|
As Billy Tallis noted in our review of the drive, the 600p “offer[s] peak performance that is as high as promised” but do bear in mind that these are drives meant for consumer systems. So best not to try running your database server off of one.
Intel Optane Memory 32GB
Finally, we have a pair of Intel’s recently-released Optane Memory cache drives. Built using Intel’s newly-developed next-generation 3D XPoint memory technology, Intel has opted to start the consumer rollout of the technology by building cache drives, which maps well to the higher endurance and higher serial performance of 3D XPoint.
|Intel Optane Memory Specifications|
|Form Factor||M.2 2280 B+M key|
|Interface||PCIe 3.0 x2|
|Memory||128Gb 20nm Intel 3D XPoint|
|Sequential Read||1350 MB/s|
|Sequential Write||290 MB/s|
|Random Read||240k IOPS|
|Random Write||65k IOPS|
|Read Latency||9 µs|
|Write Latency||30 µs|
|Active Power||3.5 W|
|Idle Power||1 W|
It’s important to note that to take full advantage of these drives, you will need a Kaby Lake Core-series processor and a supported chipset, as that’s the only platform to support Intel’s full Optane cache mode. Otherwise the drives can be used in some other systems, but they’d only show up as a small 32GB NVMe drive. According to our resident SSD-sommelier, Billy Tallis, these drives tend to be best paired with something like a Core i3 processor in a lower-end system, to transparently speed up performance on a HDD boot volume.
Finally, as with our other giveaways, today’s giveaway is only open for 48 hours, so be sure to enter soon. However please note that for legal reasons, we’re only able to open these giveaways to residents of the United States.
Good luck to everyone! And be sure to check in Monday for our next giveaway.